Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Mount Type | 2 Bolt |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| RPM [Max] | 192 rpm |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Paint Code | A |
| Motor Element | Gerotor |
| Mounting Hole Size | 0.535 in |
| Seal Material | Buna-N |
| Splines | 0 |
| Flow Rate | 15 gal/min |
| Port Type | Manifold |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Pilot Diameter | 3.25 in |
| Case Drain | None |
| Displacement (in³/rev) | 17.9 |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.19 in |
| Pressure [Max] | 1350 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain Code | 0 |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Port Code | C |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Weight | 14.0 LB |
