Find a Service Center
- H Series
- 2-Bolt Flange
- 1 in Straight Shaft w/Woodruff Key
- 1/2 NPTF Side Port
- Nitrile Seals
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | 1/2 |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Port Code | B |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Displacement (in³/rev) | 2.8 |
| Duty | Standard-Duty |
| Special Features | None |
| Bolt Circle Dia. | 4.18 in |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt Flange |
| Mounting Type Code | A |
| Corrosion Resistant | No |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Shaft Size & Type | 1 in Straight w/Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Shaft Type | Straight w/ Woodruff Key |
| Paint/Packaging | N/A |
| Splines | 0 |
| Case Drain | None |
| Paint Code | J |
| Motor Element | Gerotor |
| Weight | 11.2 LB |
