Find a Service Center
- Steel Material
features
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Browning Gears are rated in accordance with AGMA standards
- Adequate Bearing support Must be Provided
- Bevel and Miter Gears Develop Axial Thrust
| Number of Teeth/Threads | 96 |
| Bore Size (in) | 0.625 |
| Bore Type | Minimum Plain Bore |
| Mounting Distance | 1.688 |
| Pressure Angle | 20 |
| Bore (Min) (in) | 0.625 |
| Pitch Diameter (in) | 6 |
| Hub Projection (in) | 0.875 |
| Length Through Bore (in) | 1.25 |
| Hub Diameter (in) | 1.75 |
| Material | Steel |
| Bore (Max) (in) | 1 |
| Diametral Pitch | 16 |
| Face Width (in) | 0.61 |
| Weight | 3.32 LB |
| EAN or UPC | 662289144693 |
