Skip to content Skip to navigation menu
766590 / Setscrew Lock Ball Bearing

VF4S-215AH

766590 / Setscrew Lock Ball Bearing
Item #100935680
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 4-Bolt Flange
  • Cast Iron Housing Material
  • 0.94 in Inside Diameter
+ Show More + Show Less
766590 / Setscrew Lock Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 4-Bolt Flange
  • Cast Iron Housing Material

features

  • Powder coat epoxy cast iron housing
  • Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
  • Single lip contact seal and flinger
  • Air Handling noise check for quiet operation
  • Looser than standard housing fit for ease of alignment on lightweight frames

options

  • Air Handling Housing Fit, Noise Tested
Retainer Material Molded Fiber Glass Reinforced Nylon
Bore Shape Straight
Inner Race Length (in) 1.375
Radial Dynamic Load Capacity (lb) 2801
Length Through Bore 1.38 in
Misalignment Type Static Only
Bore Size - Inch 0.938
Inch/Metric Inch
Mounted Unit Duty Normal
Foot Height (in) 0.5
Overall Length (in) 3.75
Overall Height (in) 1.438
Bearing Insert Coating Black Oxide Coated Inner Ring
Platform Air Handling
Overall Width (in) 3.75
Expansion No
Overall Width 3.75 in
Housing Width 3.75 in
Bolt Center-to-Center Length (in) 2.7500
Outer Ring Land Profile Standard
Housing Material Cast Iron
Relubricatable Yes
Duty Series Normal
Inner Ring OD (in) 1.375
Bolt Size 0.44 in
Retainer Type Ball Riding Retainer
Bore Type Straight
Replaceable Insert Yes
Internal Clearance Standard
Seal Type Single Lip Contact with Flinger
T Core 2.5
Housing Width (in) 3.75
Finish Black Oxide Coated Inner Ring
Foot Height 0.5 in
Flange Type 4-Bolt Flange
Measure Units Inch
End Cap No
Inner Race Heat Treat Method Zone-Hardened
Heat Treat Method (Inner Race) Zone-Hardened
Bolt Size (in) 0.4375
Length Through Bore (in) 1.375
Insert Material 52100 Bearing Steel, Black Oxided Inner
I.D. 0.94 in
RPM [Max] 5500 rpm
Housing Base Semi-Solid
Maximum Operating Temperature 200
Radial Static Load Capacity (lb) 1651
Insert No. VS-215
Lubrication Lithium Complex NLGI 2 Grease
Radial Dynamic Load Capacity 2801 lb
Radial Static Load Capacity 1651 lb
Pilot Configuration No Pilot
Housing Construction One Piece
Centerline to Front Face (in) 0.813
Weight 1.96 LB
EAN or UPC 662460066165
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison