Skip to content Skip to navigation menu
Intermediate Duty Semi-Solid 2-Bolt Flange Unit

VF2S-110AH

Intermediate Duty Semi-Solid 2-Bolt Flange Unit
Item #102224871
  • Inch
  • Single Lip Contact Seal
  • Intermediate Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material
  • 0.63 in Inside Diameter
+ Show More + Show Less
Intermediate Duty Semi-Solid 2-Bolt Flange Unit
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Inch
  • Single Lip Contact Seal
  • Intermediate Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material

features

  • Powder coat epoxy cast iron housing
  • Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
  • Single lip contact seal
  • Air Handling noise check for quiet operation
  • Looser than standard housing fit for ease of alignment on lightweight frames

options

  • Air Handling Housing Fit, Noise Tested
Bore Type Straight
Housing Width 0.63 in
Outer Ring Land Profile Standard
Heat Treat Method (Inner Race) Zone-Hardened
Platform Air Handling
Insert Material 52100 Bearing Steel, Black Oxided Inner
Expansion No
Radial Static Load Capacity (lb) 1117
RPM [Max] 5000 rpm
Centerline to Front Face (in) 0.625
Length Through Bore (in) 0.938
Housing Width (in) 0.625
Inner Ring OD (in) 0.969
Replaceable Insert Yes
End Cap No
Overall Height to Inner Ring 1.08 in
Bore Size - Inch 0.625
Maximum Operating Temperature 200
Bolt Size 0.38 in
Inner Race Length (in) 0.938
Foot Height (in) 0.375
Bolt Size (in) .3750
Finish Black Oxide Coated Inner Ring
Insert No. VS-110
Radial Dynamic Load Capacity (lb) 2108
Inner Race Heat Treat Method Zone-Hardened
Inch/Metric Inch
Radial Static Load Capacity 1117 lb
Length Through Bore 0.94 in
Lubrication Lithium Complex NLGI 2 Grease
Seal Type Single Lip Contact Seal
Housing Construction One Piece
Overall Width (in) 2.125
Duty Series Intermediate
Bore Shape Straight
Housing Material Cast Iron
Retainer Material Molded Fiber Glass Reinforced Nylon
Bearing Insert Coating Black Oxide Coated Inner Ring
Housing Base Semi-Solid
Overall Height (in) 1.0781
Radial Dynamic Load Capacity 2108 lb
Flange Type 2-Bolt Flange
Internal Clearance Standard
Retainer Type Ball Riding Retainer
Pilot Configuration No Pilot
Mounted Unit Duty Intermediate
Overall Width 2.13 in
Overall Length (in) 3.875
I.D. 0.63 in
Measure Units Inch
Bolt Center-to-Center Length (in) 3
Relubricatable Yes
Overall Height to Inner Ring (in) 1.078
Misalignment Type Static Only
Foot Height 0.38 in
Weight 0.68 LB
EAN or UPC 662460394640
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison