SSF2S-114

Intermediate Duty 2-Bolt Flange Unit

Item #100936373

0.88 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Insert No.	LS-114
Overall Width	1.81 in
Housing Width (in)	1.8125
Expansion	No
Inner Ring OD (in)	1.375
Bolt Size	0.31 in
Inner Race Length (in)	1.1094
Internal Clearance	Standard
Radial Static Load Capacity (lb)	1651
Radial Static Load Capacity	1651 lb
Radial Dynamic Load Capacity	2801 lb
Housing Material	Stamped Steel
Heat Treat Method (Inner Race)	Zone-Hardened
End Cap	No
Length Through Bore (in)	1.1094
Maximum Operating Temperature	200
Misalignment Type	Static Only
I.D.	0.88 in
Inch/Metric	Inch
Retainer Type	Ball Riding Retainer
Overall Height to Inner Ring (in)	1.109
Overall Length (in)	3.75
Seal Type	Single Lip Contact Seal
Bore Size - Inch	0.875
Bearing Insert Coating	Uncoated
Relubricatable	Yes
Finish	Uncoated
Measure Units	Inch
Overall Width (in)	1.8125
Duty Series	Intermediate
Bolt Size (in)	0.3125
Length Through Bore	1.11 in
Mounted Unit Duty	Intermediate
Bolt Center-to-Center Length (in)	3
Insert Material	52100 Bearing Steel
Outer Ring Land Profile	Standard
Replaceable Insert	Yes
Bore Shape	Straight
Lubrication	Lithium Complex NLGI 2 Grease
Foot Height (in)	0.172
Housing Construction	Two Piece
Retainer Material	Molded Fiber Glass Reinforced Nylon
Housing Width	1.81 in
Bore Type	Straight
Inner Race Heat Treat Method	Zone-Hardened
Foot Height	0.17 in
Flange Type	2-Bolt Flange
Pilot Configuration	No Pilot
Radial Dynamic Load Capacity (lb)	2801
RPM [Max]	3500 rpm
Centerline to Front Face (in)	0.765
Overall Height to Inner Ring	1.11 in
Overall Height (in)	1.1094
Weight	0.716 LB
EAN or UPC	662460336961