Find a Service Center
Alternate Products
- Low Torque Style
- SLD 350 Type
- 150 mm Inside Diameter
- 168 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
- Easy mounting and dismounting
- No fretting corrosion/no bonding of parts
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
caution
- Design allows for possible axial shifting of components relative to the shaft, so utilize this device where exact positioning is not critical
| I.D. | 150 mm |
| Thickness | 1.102 in |
| Pressure on the Shaft | 16099 psi |
| Mountable Thickness | 1.102 in |
| Locking Type | Internal Locking |
| Type | SLD 350 |
| Inch/Metric | Metric |
| Total Width @ Relaxed State | 27.99 mm |
| Torque | 9104 ft lb |
| Material | Silver/Metallic |
| O.D. | 168 mm |
| Shaft Tolerance | -0.0025 in |
| Transmitted Axial Force | 36999 lb/ft |
| Hub Bore Tolerance | 0.0016 in |
| Style | Low Torque |
| Pressure on the Hub | 13053 psi |
| Transmitted Torque (Max) | 9104 lb/ft |
| Screw Material | Steel |
| Weight | 2.132 LB |
| EAN or UPC | 697904985436 |
