Find a Service Center
Alternate Products
- Self-Releasing Style
- SLD 1500 Type
- 1 1/4 in Inside Diameter
- 2.362 in Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Motors must be run under sufficient load to prevent over speeding
| Inch/Metric | Inch |
| Shaft Tolerance | -0.0025 in |
| Screw Tightening Torque | 11 lb/ft |
| Style | Self-Releasing |
| Torque | 11 in lb |
| Screw Material | Steel |
| Set Screw Size | M6 |
| No. of Screws | 12 |
| Pressure on the Shaft | 29511 psi |
| Collar Width | 0.787 in |
| Mountable Thickness | 0.669 in |
| Thickness | 0.787 in |
| I.D. | 1 1/4 in |
| Total Width @ Relaxed State | 1.023 in |
| Type | SLD 1500 |
| Locking Type | Internal Locking |
| Material | Silver/Metallic |
| Screw Style | Socket Head Cap Screw |
| Transmitted Axial Force | 9312 lb/ft |
| Contact Length | 0.669 in |
| O.D. | 2.362 in |
| Transmitted Torque (Max) | 485 lb/ft |
| Hub Bore Tolerance | 0.0025 in |
| Pressure on the Hub | 15617 psi |
| Weight | 0.661 LB |
| EAN or UPC | 697904980844 |
