Find a Service Center
- 2.4375" Shaft, 2.6875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
- The patented Survivor™ PT polymer-housed units have been tested to withstand a wide range of highly corrosive chemicals commonly found in food and beverage processing industries. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F). The finish will not scrape or flake off during use.
applications
- Food processing
- Conveyors
- Agriculture
- Fans and blowers
| Overall Width | 2 3/4 in |
| Base Length | 9 7/16 in |
| Bolt Hole Spacing Range [Max] | 8 9/16 in |
| Bearing Insert | GY1207KRRB |
| End Type | Open End |
| Series | YAK Series |
| Insert Type | Steel Insert |
| Bolt Hole Spacing Range [Min] | 6 1/4 in |
| Seal Type | Contact Seals |
| Pillow Block Type | Thru-Bolt |
| Housing Material | Cast Iron |
| Housing Height | 5 13/32 in |
| Inch/Metric | Inch |
| Mounted Unit Duty | Normal-Duty |
| Housing Construction | 1 Piece |
| Collar No. | N/A |
| Lubrication | Relubricatable |
| Bolt Hole Spacing | 7 13/32 in |
| Shaft Dia. | 2.4375 in |
| Dynamic Load Rating | 13400 lbf |
| Bearing Type | Ball Bearing |
| Base Height | 7/8 in |
| Bolt Size | 5/8 in |
| Bearing Design | Non-Expansion |
| Base Width | 2 3/8 in |
| Length Through Bore | 2.5625 in |
| Collar O.D. | 3.011 in |
| Locking Device | Setscrew Locking Collar |
| Bolt Holes | 2 |
| Weight | 9.786 LB |
| EAN or UPC | 87796157613 |
