Find a Service Center
Alternate Products
AMI Bearings Inc.
KHLP201-8
Narrow Inner Ring Cast Iron Housing Material Pillow Block
Item #101398993
- 0.5" Shaft, 1.0625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Holes | 2 |
| Bolt Size | 3/8 in |
| Housing Material | Cast Iron |
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Collar O.D. | 0.9 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Normal-Duty |
| Series | YAK Series |
| Locking Device | Setscrew Locking Collar |
| Bolt Hole Spacing | 3 5/8 in |
| Base Height | 11/32 in |
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 1.07813 in |
| Inch/Metric | Inch |
| Bolt Hole Spacing Range [Max] | 4 1/2 in |
| Seal Type | Contact Seals |
| Bearing Insert | GY1008KRRB |
| Shaft Dia. | 0.5 in |
| Housing Construction | 1 Piece |
| Overall Width | 1 7/32 in |
| Housing Height | 2 3/32 in |
| Insert Type | Steel Insert |
| Bolt Hole Spacing Range [Min] | 2 3/4 in |
| Base Width | 1 3/16 in |
| Base Length | 4 7/8 in |
| End Type | Open End |
| Weight | 1.088 LB |
| EAN or UPC | 87796157439 |
