SAS2

SAS Series Cast Iron 2-Bolt Ball Bearing Pillow Block

Item #101019242

2" Shaft, 2.5" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type

Auto Replenish

each One-time purchase

Product Details

2" Shaft, 2.5" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type

This streamlined, rugged, one-piece SAS pillow block unit combines Timken's proven RAS housing and GYA-RRB setscrew bearing. The GYA-RRB bearing employs a positive contact land riding seal and specially designed setscrews. The SAS pillow block can be mounted and will operate in any position. Bearing housed units are factory prelubricated, but a grease fitting is provided to allow for relubrication, if required.

Specifications

Insert Type	Steel Insert
Mounted Unit Duty	Normal-Duty
Base Width	2 5/16 in
Housing Material	Cast Iron
Bolt Size	5/8 in
Base Height	13/16 in
Outer Ring Size	211
Bearing Insert	GYA200RRB
Locking Device	Setscrew Locking Collar
Dynamic Load Rating	10,800.00 lbf
Overall Width	2 13/32 in
Housing Construction	1 Piece
Collar O.D.	2 3/4 in
Series	SAS Series
Housing Height	4 31/32 in
Bearing Type	Ball Bearing
Bolt Hole Length	1 5/32 in
Length Through Bore	1 53/64 in
Bolt Hole Width	23/32 in
Bolt Holes	2
Center Line to Base Dimension [Min]	2 1/2 in
Bolt Hole Spacing	6 15/16 in
Bearing Design	Non-Expansion
End Type	Open End
Lubrication	Relubricatable
Seal Type	Contact Seals
Base Length	8 3/4 in
Shaft Dia.	2 in
Pillow Block Type	Thru-Bolt
Inch/Metric	Inch
Weight	7.784 LB
EAN or UPC	87796061026