Find a Service Center
- 1.5" Shaft, 3.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir SAOL type heavy series pillow blocks are designed for applications where higher-than-usual temperature applications where for any reason one or more floating bearing units required. The floating unit allows its bearing to move axially as the shaft expands because of the temperature rise, while the fixed unit maintains shaft location. Bearings also have loose internal fit. The SAOL unit is equipped with a heavy series, self-aligning SMN wide inner ring bearing and self-locking collar. An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type). By removing the spacer ring, the assembly becomes a floating unit.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Locking Device | Eccentric Locking Collar |
| Inch/Metric | Inch |
| Insert Type | Steel Insert |
| Overall Width | 4 7/8 in |
| End Type | Open End |
| Length Through Bore | 4.875 in |
| Seal Type | Contact Seals |
| Series | SAOL Series |
| Bolt Hole Length | 1 in |
| Housing Width | 5 3/4 in |
| Bearing Insert | SMN108KS |
| Base Length | 11 3/8 in |
| Bolt Hole Width | 3/4 in |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Design | Expansion/Non-Expansion |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 9 in |
| Base Height | 13/16 in |
| Housing Construction | 1 Piece |
| Base Width | 3 1/8 in |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| Shaft Dia. | 1.5 in |
| Bolt Size | 5/8 in |
| Weight | 25.58 LB |
| EAN or UPC | 87796059702 |
