Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Width | 9/32 in |
| Seal Type | Contact Seals |
| Static Load Rating [Max] | 312.00 lbf |
| Material | Steel |
| Snap Ring | No Snap Ring |
| I.D. | 3/8 in |
| Fillet Radius | 0.016 in |
| Lubricant | Polyurea Base |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 9/32 in |
| Enclosure | Double Sealed |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Rows of Balls | Single |
| Seal Material | Buna-N |
| Dynamic Load Rating | 830.00 lbf |
| Inner Ring Width | 9/32 in |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Temperature Range [Max] | 275 °F |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Temperature Range [Min] | -30 °F |
| Open Width | 7/32 in |
| icNumber | 7696119 |
| No. in Set | Single Bearing |
| O.D. Type | Straight |
| Closed Width | 9/32 in |
| Bore Type | Round Bore |
| O.D. | 7/8 in |
| Bearing Type | Radial |
| Cage Type | Metal |
| Precision | Standard |
| Ball Material | Steel |
| Contact Angle | 0° |
| Weight | 0.044 LB |
| EAN or UPC | 87796044272 |
| NSN Number | 3110-00-520-3877 |
