Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Preload Level | None |
| Snap Ring | No Snap Ring |
| Enclosure | Open |
| Pre Lubricant | None |
| Closed Width | 9/32 in |
| Origin | Single Row Radial |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Outer Ring Width | 7/32 in |
| Open Width | 7/32 in |
| O.D. | 7/8 in |
| Radial Internal Clearance | C3 |
| O.D. Type | Straight |
| Material | Steel |
| Dynamic Load Rating | 830.00 lbf |
| Precision | Standard |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| I.D. | 3/8 in |
| Inner Ring Width | 7/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| Precision Level | Standard (ABEC 1) |
| Seal Material | None |
| Bore Type | Round Bore |
| icNumber | 7696812 |
| Width | 7/32 in |
| Fillet Radius | 0.016 in |
| Bearing Type | Radial |
| Cage Type | Metal |
| Cage Material | Steel |
| Static Load Rating [Max] | 312.00 lbf |
| Lubricant | Oil Preservative |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| No. in Set | Single Bearing |
| Weight | 0.17 LB |
| EAN or UPC | 87796044203 |
| NSN Number | 3110-00-516-5413 |
