Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir synthetic rubber pillow blocks are designed for domestic heating, air-conditioning, ventilating equipment, and many other applications where low-cost, light-duty, and noiseless operation are essential. All units are available with the RA-RR extended inner ring bearings with positive contact, land riding seals and self-locking collar. An initial supply of long-life grease is provided in the one-piece, nonrelubricatable housings made of high grade, durable, molded synthetic rubber. Rubber pillow blocks with provision for relubrication are designated as the RBG series. At slight additional cost, both can be supplied with a .050" to .062" thick, corrosion-resistant steel strap for applications requiring greater rigidity. When the strap is reqired, add the suffix U to the pillow block designated as RGBU.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Overall Width | 1 3/4 in |
| Housing Height | 3 5/32 in |
| End Type | Open End |
| Base Width | 1 3/8 in |
| Length Through Bore | 1.75 in |
| Bearing Insert | RA103RR |
| Housing Width | 3 3/16 in |
| Base Length | 6 in |
| Housing Radial Load | 90 lbf |
| Inch/Metric | Inch |
| Mounted Unit Duty | Light-Duty |
| Collar No. | S1103K |
| Locking Device | Eccentric Locking Collar |
| Bearing Type | Ball Bearing |
| Housing Material | Rubber |
| Base Height | 3/4 in |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.1875 in |
| Collar O.D. | 1 47/64 in |
| Series | RBG Series |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing | 4 1/2 in |
| Bolt Hole Width | 39/64 in |
| Weight | 1.368 LB |
| EAN or UPC | 87796058033 |
