Fafnir | RAK1 1/2 | RAK Series Cast Iron Pillow Block

RAK1 1/2

RAK Series Cast Iron Pillow Block

Item #101955239

1.5" Shaft, 1.9375" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar

Auto Replenish

each One-time purchase

Product Details

1.5" Shaft, 1.9375" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar

Recommended for industrial applications where normal loads are encountered. They ensure the user the advantages of a compact, one-piece housing, which can be mounted in any position. The pillow blocks are self aligning at mounting with the spherical O.D. of the bearing fitting into a corresponding spherical housing seat. These units are prelubricated and ready for immediate installation. A grease fitting provides for relubrication if required. Self-locking collars are supplied with all units.

Specifications

Series	RAK Series
Length Through Bore	1 11/16 in
Collar O.D.	2 3/8 in
Base Width	2 1/32 in
Seal Type	Contact Seals
Bearing Insert	G1108KRRB
Bolt Hole Spacing	5 3/8 in
Bearing Design	Non-Expansion
Collar No.	S1108KT
Lubrication	Relubricatable
Housing Height	4 in
Pillow Block Type	Thru-Bolt
Housing Material	Cast Iron
Inch/Metric	Inch
Base Height	3/4 in
Bearing Type	Ball Bearing
Center Line to Base Dimension [Min]	1 15/16 in
Insert Type	Steel Insert
Bolt Hole Width	9/16 in
Bolt Size	1/2 in
Base Length	7 1/16 in
Shaft Dia.	1 1/2 in
Outer Ring Size	208
Bolt Holes	2
Bolt Hole Length	1 1/32 in
Overall Width	2 5/16 in
Dynamic Load Rating	8,150.00 lbf
Housing Construction	1 Piece
Locking Device	Eccentric Locking Collar
End Type	Open End
Mounted Unit Duty	Normal-Duty
Weight	5.576 LB
EAN or UPC	87796059559
NSN Number	3130-00-967-2848