Find a Service Center
- 2.9375" Shaft, 4.5625" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Type | Ball Bearing |
| Base Height | 1 7/8 in |
| Series | LSAO Series |
| End Type | Open End |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Bearing Insert | GN215KRRB |
| Shaft Dia. | 2.9375 in |
| Bearing Design | Non-Expansion |
| Inch/Metric | Inch |
| Housing Height | 8 9/16 in |
| Seal Type | Labyrinth Seals |
| Bolt Size | 7/8 in |
| Collar No. | SN215K |
| Bolt Hole Length | 1 in |
| Insert Type | Steel Insert |
| Overall Width | 4 3/8 in |
| Base Length | 15 3/8 in |
| Length Through Bore | 3.9375 in |
| Bolt Hole Width | 1 3/8 in |
| Locking Device | Eccentric Locking Collar |
| Mounted Unit Duty | Heavy-Duty |
| Collar O.D. | 4 7/16 in |
| Base Width | 4 3/8 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 12 3/8 in |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Temperature Range [Max] | 350 °F |
| Housing Width | 8 in |
| Weight | 44.24 LB |
| EAN or UPC | 87796061880 |
