Find a Service Center
- Single Row Angular Contact Bearing, 55 mm ID x 140 mm OD x 33 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 35° Contact Angle
description
- The angular contact Heavy 7400 series is dimensionally interchangeable with the radial 400 series.Those sizes with a "WN" suffix include a refined bore diameter tolerance. The 7400 series can sustain heavier thrust and combined loads than the 7300WN series. A single bearing is recommended for applications in which the thrust load is in one direciton or, in the case of combined loads, the thrust load is high in relation to the radial load.A duplex pair is recommended for application where thrust is present in both dirctions or where axial displacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Those sizes with a suffix "W" have a 20° contact angle and a steel retainer.Those sizes with a suffix "PW" have a 35° contact angle and a a steel retainer.Those sizes with a "WN" suffix have a 40° contact angle and a one-piece, high-strength macined bronzed cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Rows of Balls | Single |
| Precision | Standard |
| No. in Set | Single Bearing |
| Seal Type | Unsealed |
| Cage Type | Metal |
| Material | Steel |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 33 mm |
| Lubricant | Oil Preservative |
| Contact Angle | 35° |
| Radial Internal Clearance | C3 |
| O.D. | 140 mm |
| icNumber | 7695840 |
| Dynamic Load Rating | 27500 lbf |
| Cage Material | Brass/Bronze |
| Origin | Single Row Angular Contact |
| Ball Material | Steel |
| Inch/Metric | Metric Bore |
| Seal Material | None |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Open |
| Preload Level | None |
| Static Load Rating [Max] | 16000 lbf |
| Inner Ring Width | 33 mm |
| Bearing Type | Angular Contact |
| I.D. | 55 mm |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Fillet Radius | 0.08 in |
| Internal Design | Universal Mounting |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Locking Device | No Locking Device |
| Weight | 5.91 LB |
| EAN or UPC | 87796074385 |
