Find a Service Center
- Single Row Angular Contact Bearing, 75 mm ID x 130 mm OD x 25 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Cage Type | Metal |
| Enclosure | Open |
| Lubricant | Oil Preservative |
| Origin | Single Row Angular Contact |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 25 mm |
| Dynamic Load Rating | 17600 lbf |
| I.D. | 75 mm |
| Seal Material | None |
| Ball Material | Steel |
| Contact Angle | 40° |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Bearing Type | Angular Contact |
| Seal Type | Unsealed |
| Inch/Metric | Metric Bore |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| Static Load Rating [Max] | 13200 lbf |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| Precision | Standard |
| Inner Ring Width | 25 mm |
| icNumber | 7695987 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| No. in Set | Single Bearing |
| O.D. | 130 mm |
| Preload Level | None |
| Material | Steel |
| Fillet Radius | 0.059 in |
| Internal Design | Universal Mounting |
| Locking Device | No Locking Device |
| Cage Material | Brass/Bronze |
| Weight | 2.8 LB |
| EAN or UPC | 87796068377 |
