Find a Service Center
- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.196" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Inch/Metric | Inch Bore |
| O.D. | 1/2 in |
| Ball Material | Steel |
| Origin | Single Row Radial |
| Bearing Type | Radial |
| Snap Ring | No Snap Ring |
| Temperature Range [Max] | 275 °F |
| I.D. | 3/16 in |
| Contact Angle | 0° |
| Outer Ring Width | 0.196 in |
| Closed Width | 0.196 in |
| O.D. Type | Straight |
| Fillet Radius | 0.012 in |
| Seal Type | Contact Seals |
| Temperature Range [Min] | -30 °F |
| Precision | Standard |
| Enclosure | Double Sealed |
| Preload Level | None |
| icNumber | 7696113 |
| Rows of Balls | Single |
| Material | Steel |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 325.00 lbf |
| Cage Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | Buna-N |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| No. in Set | Single Bearing |
| Width | 0.196 in |
| Static Load Rating [Max] | 110.00 lbf |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 0.196 in |
| Open Width | 5/32 in |
| Lubricant | Polyurea Base |
| Weight | 0.022 LB |
| EAN or UPC | 87796044470 |
| NSN Number | 3110-00-580-4046 |
