Find a Service Center
- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.156" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Inner Ring Width | 5/32 in |
| Pre Lubricant | None |
| Precision | Standard |
| Cage Type | Metal |
| Preload Level | None |
| Inch/Metric | Inch Bore |
| Open Width | 5/32 in |
| Lubricant | Oil Preservative |
| Static Load Rating [Max] | 110.00 lbf |
| Radial Internal Clearance | C3 |
| Seal Type | Unsealed |
| Enclosure | Open |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Fillet Radius | 0.012 in |
| Origin | Single Row Radial |
| O.D. Type | Straight |
| Rows of Balls | Single |
| Material | Steel |
| Ball Material | Steel |
| Bore Type | Round Bore |
| No. in Set | Single Bearing |
| Seal Material | None |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 325.00 lbf |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| Width | 5/32 in |
| icNumber | 7696399 |
| Snap Ring | No Snap Ring |
| I.D. | 3/16 in |
| Closed Width | 0.196 in |
| O.D. | 1/2 in |
| Outer Ring Width | 5/32 in |
| Cage Material | Steel |
| Weight | 0.16 LB |
| EAN or UPC | 87796044432 |
| NSN Number | 3110-00-289-8084 |
