Find a Service Center
- Single Row Radial Bearing, 40 mm ID x 80 mm OD x 18 mm Wide, Open With Snap Ring, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Maximum Capacity
description
- The 200W Series, maximum capacity type is dimensionally interchangeable with the 200K type but has greater capacity for supporting heavier radial loads and light thrust loads in either direction. Maximum capacity bearings feature a filling slot in the shoulder of each raceway to assemble an extra large ball complement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision Level | Standard (ABEC 1) |
| O.D. | 80 mm |
| Seal Material | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Preload Level | None |
| Width | 18.000 mm |
| Material | Steel |
| Bearing Type | Radial |
| Fillet Radius | 0.039 in |
| Inch/Metric | Metric Bore |
| Enclosure | Open |
| Seal Type | Unsealed |
| Pre Lubricant | None |
| Contact Angle | 0° |
| Dynamic Load Rating | 10400 lbf |
| Lubricant | Oil Preservative |
| Radial Internal Clearance | C3 |
| Capacity | Maximum Capacity |
| Snap Ring Thickness | 0.065 in |
| Snap Ring O.D. | 3.406 in |
| O.D. Type | Straight w/ Snap Ring |
| No. in Set | Single Bearing |
| Precision | Standard |
| Outer Ring Width | 18 mm |
| icNumber | 7699746 |
| Rows of Balls | Single |
| Cage Type | Metal |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 5850 lbf |
| Inner Ring Width | 18 mm |
| Locking Device | No Locking Device |
| I.D. | 40 mm |
| Snap Ring Offset | 0.19 in |
| Snap Ring | With Snap Ring |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Ball Material | Steel |
| Weight | 0.91 LB |
| EAN or UPC | 87796041431 |
| NSN Number | 3110-00-155-6701 |
