Find a Service Center
Alternate Products
- Cam Follower
- 2 1/2" OD V-Groove Roller
- 3/4" Eccentric Stud
- 3/4-16 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Dynamic Load Rating | 2760 lbf |
| End Type | Metal Plug |
| Roller Width | 1 5/16 in |
| Bearing Type | Ball Bearing |
| Roller Type | V-Groove |
| Threads per Inch | 16 |
| Inch/Metric | Inch |
| Material | Steel |
| Stud Type | Eccentric |
| Thread Size | 3/4 |
| Stud Length | 1.75 in |
| Stud Dia. | 0.75 in |
| Thread Type | UNF |
| Roller Dia. | 2 1/2 in |
| Enclosure | Sealed |
| Weight | 1.4 LB |
| EAN or UPC | 651041185135 |
