Find a Service Center
Alternate Products
- Cam Follower
- 6" OD Straight Roller
- 2 1/2" Standard Stud
- 2 1/2-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Dynamic Load Rating | 35800 lbf |
| Roller Dia. | 6 in |
| Threads per Inch | 12 |
| End Type | Metal Plug |
| Stud Type | Standard |
| Roller Type | Straight |
| Material | Steel |
| Inch/Metric | Inch |
| Enclosure | Sealed |
| Stud Length | 5 1/2 in |
| Thread Type | UNF |
| Stud Dia. | 2 1/2 in |
| Roller Width | 3 in |
| Thread Size | 2 1/2 |
| Bearing Type | Tapered Roller Bearing |
| Weight | 28.0 LB |
| EAN or UPC | 651041149182 |
