Find a Service Center
- Cam Follower
- 3 1/4" OD Straight Roller
- 1 1/4" Eccentric Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Roller Dia. | 3 1/4 in |
| Thread Size | 1 1/4 |
| Roller Width | 2 in |
| Material | Steel |
| Inch/Metric | Inch |
| Thread Type | UNF |
| Stud Length | 2.25 in |
| Bearing Type | Tapered Roller Bearing |
| End Type | Metal Plug |
| Stud Dia. | 1.25 in |
| Roller Type | Straight |
| Threads per Inch | 12 |
| Stud Type | Eccentric |
| Dynamic Load Rating | 14300 lbf |
| Enclosure | Sealed |
| Weight | 4.8 LB |
| EAN or UPC | 651041185098 |
