Find a Service Center
Alternate Products
- Cam Follower
- 2" OD Straight Roller
- 7/8" Standard Stud
- 7/8-14 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Thread Type | UNF |
| Thread Size | 7/8 |
| Bearing Type | Ball Bearing |
| Dynamic Load Rating | 3490 lbf |
| Material | Steel |
| Stud Length | 2 in |
| Roller Type | Straight |
| Stud Dia. | 7/8 in |
| Roller Dia. | 2 in |
| End Type | Metal Plug |
| Roller Width | 1 11/16 in |
| Threads per Inch | 14 |
| Enclosure | Sealed |
| Stud Type | Standard |
| Inch/Metric | Inch |
| Weight | 1.3 LB |
| EAN or UPC | 651041149106 |
