Find a Service Center
Alternate Products
- Cam Follower
- 2" OD Flanged Roller
- 7/8" Standard Stud
- 7/8-14 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Stud Length | 2 in |
| Material | Steel |
| Roller Type | Flanged |
| Static Capacity | 2000 lbf |
| Thread Size | 7/8 |
| Dynamic Load Rating | 3490 lbf |
| Bearing Type | Ball Bearing |
| Thread Type | UNF |
| Inch/Metric | Inch |
| Flange Thickness | 0.59375 in |
| Roller Width | 1 11/16 in |
| Enclosure | Sealed |
| End Type | Metal Plug |
| Threads per Inch | 14 |
| Stud Dia. | 0.875 in |
| Roller Dia. | 2 in |
| Dynamic Thrust Load Rating | 1830 lbf |
| Stud Type | Standard |
| Weight | 1.8 LB |
| EAN or UPC | 651041149236 |
