Find a Service Center
- 40 mm ID x 90 mm OD x 23 mm Wide
- Open
- ABEC 1
- Polyamide Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- In accordance with ISO 15-1981
| Ball Material | Steel |
| Seal Material | None |
| Outer Ring Width | 23 mm |
| Precision | Standard |
| Contact Angle | 40° |
| Snap Ring | No Snap Ring |
| Cage Material | Polyamide (Molded Nylon) |
| Cage Type | Plastic |
| Limiting Speed - Grease | 6700 rpm |
| Enclosure | Open |
| Width | 0.91 in, 23 mm |
| Capacity | High Capacity |
| Series | 7300 |
| Preload Level | None |
| Radial Internal Clearance | Normal |
| O.D. | 90 mm |
| Lubricant | Oil Preservative |
| Limiting Speed - Oil | 9000 rpm |
| icNumber | 7695833 |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 0.91 in, 23 mm |
| Material | Steel |
| Flush Ground | No |
| Bearing Design | Single Row Angular Contact |
| I.D. | 40 mm |
| Inch/Metric | Metric Bore |
| Bore Type | Round Bore |
| Bearing Type | Angular Contact |
| Seal Type | Unsealed |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Weight | 1.389 LB |
| EAN or UPC | 7316576634130 |
