Find a Service Center
- Radial Deep Groove Bearing Type
- 55 mm Inner Diameter
- 106.5 mm Outer Diameter
- 21 mm Width
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- In accordance with ISO 15-1981
| Bearing Design | Deep Groove Design |
| Tolerance | Normal (PN) |
| Snap Ring | With Snap Ring |
| Outer Ring Width | 21 mm |
| Bearing Type | Radial Deep Groove |
| Radial Internal Clearance | Group N |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7701809 |
| Limiting Speed - Oil | N/A |
| Width | 0.83 in, 21 mm |
| Series | 62 |
| Material | Steel |
| Preload Level | None |
| O.D. | 106.5 mm |
| Seal Type | Contact Seals |
| Lubricant | Grease |
| Relubrication Feature | Without |
| Contact Angle | 0° |
| Inner Ring Width | 0.83 in, 21 mm |
| Capacity | Standard Capacity |
| O.D. Type | Straight w/ Snap Ring |
| Seal Material | Synthetic Rubber w/Steel Reinforcement |
| Limiting Speed - Grease | 4300 rpm |
| Inch/Metric | Metric |
| I.D. | 55 mm |
| Bore Type | Round Bore |
| Cage Type | Metal |
| Locating | Snap Ring Fitted |
| No. in Set | Single Bearing |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Cage Material | Sheet Metal |
| Ball Material | Steel |
| Enclosure | Double Sealed |
| Weight | 1.34 LB |
| EAN or UPC | 7316570548013 |
