Find a Service Center
Alternate Products
- 15 mm ID x 28 mm OD x 7 mm Wide
- Double Shielded (Non-Contact)
- ABEC 1
- Standard Cage
- Normal Clearance
applications
- Textiles
- Power tools
- Electric motors
- Pumps
- Gearboxes
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- 0
| Preload Level | None |
| Cage Material | Steel |
| O.D. Type | Straight |
| Rows of Balls | Single |
| Series | 619 |
| Seal Material | Metal |
| Dynamic Load Rating | 906 lbf |
| Temperature Range [Max] | 284 °F |
| Locking Device | No Locking Device |
| Enclosure | Double Shielded |
| Limiting Speed - Oil | 30000 rpm |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Temperature Range [Min] | -22 °F |
| icNumber | 7696235 |
| O.D. | 28 mm |
| Bearing Type | Radial |
| Ball Material | Steel |
| Outer Ring Width | 7 mm |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 459 lbf |
| Limiting Speed - Sealed | 16000 rpm |
| Precision Level | Standard (ABEC 1) |
| Width | 7.000 mm |
| Origin | Single Row Radial |
| I.D. | 15 mm |
| Contact Angle | 0° |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | Normal |
| Precision | Standard |
| Limiting Speed - Grease | 24000 rpm |
| Material | Steel |
| Inner Ring Width | 7 mm |
| Bearing Design | Deep Groove Design |
| Radial Internal Clearance Specification | Normal Clearance |
| Cage Type | Metal |
| Seal Type | Non-Contact Seals |
| No. in Set | Single Bearing |
| Bore Type | Round Bore |
| Weight | 0.04 LB |
| EAN or UPC | 7316577121929 |
