Find a Service Center
- Radial Shaft Seal
- 410 mm Shaft Diameter
- 450 mm Housing Bore Diameter
- 17.5 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Lip Material | Fluoroelastomer - Viton |
| Seal Application | General Purpose |
| Shaft Dia. | 410 mm |
| Seal Design | Bonded Design |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Cover/Compensation Ring/Plate Required | No |
| Construction | HDS1 |
| Lip Type | Non-Split |
| Temperature Range [Max] | 400 °F |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Housing Bore Dia. | 450 mm |
| Pressure | 10 psi |
| Weight | 5.988 LB |
| EAN or UPC | 85311179034 |
