Find a Service Center
- Radial Shaft Seal
- 390 mm Shaft Diameter
- 434 mm Housing Bore Diameter
- 20 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Material | Nitrile |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 390 mm |
| Case Construction | Steel Case w/Inner Case |
| Pressure | 15 psi |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Min] | -40 °F |
| Seal Design | Molded Design |
| Construction | HDS2 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Max] | 250 °F |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Lip Type | Non-Split |
| Housing Bore Dia. | 434 mm |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Weight | 6.32 LB |
| EAN or UPC | 85311172936 |
