Find a Service Center
- Radial Shaft Seal
- 350 mm Shaft Diameter
- 380 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Inch/Metric | Metric |
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Construction | HDS2 |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Non-Split |
| Seal Application | General Purpose |
| Seal Design | Molded Design |
| Surface Speed [Nom] | 5,000 ft/min |
| Housing Bore Dia. | 380 mm |
| Pressure | 15 psi |
| Shaft Dia. | 350 mm |
| Spring Material | Carbon Steel Garter |
| Weight | 2.072 LB |
| EAN or UPC | 85311122900 |
