
- Radial Shaft Seal
- 315 mm Shaft Diameter
- 365 mm Housing Bore Diameter
- 20 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Seal Application | General Purpose |
Cover/Compensation Ring/Plate Required | No |
Inch/Metric | Metric |
Temperature Range [Min] | -40 °F |
Spring Material | Carbon Steel Garter |
Surface Speed [Nom] | 5,000 ft/min |
Seal Design | Bonded Design |
Case Construction | Steel Case w/Inner Case |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Construction | HDS1 |
Pressure | 10 psi |
Lip Type | Non-Split |
Shaft Dia. | 315 mm |
Housing Bore Dia. | 365 mm |
Lip Style | Internal |
Temperature Range [Max] | 250 °F |
Lip Material | Nitrile |
Weight | 5.221 LB |
EAN or UPC | 85311119504 |
