Find a Service Center
- Radial Shaft Seal
- 660.4 mm Shaft Diameter
- 701.675 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Pressure | 15 psi |
| Temperature Range [Max] | 400 °F |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062, 0.093 |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Housing Bore Dia. | 701.675 mm |
| Shaft Dia. | 660.4 mm |
| Construction | HDS2 |
| Lip Material | Fluoroelastomer - Viton |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Assembled Design |
| Inch/Metric | Metric |
| Lip Type | Single Lip w/Spring |
| Spring Material | Stainless Steel |
| Weight | 11.869 LB |
| EAN or UPC | 85311184007 |
