Find a Service Center
- Radial Shaft Seal
- 230 mm Shaft Diameter
- 280 mm Housing Bore Diameter
- 16 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Min] | -40 °F |
| Lip Type | Non-Split |
| Temperature Range [Max] | 250 °F |
| Seal Design | Assembled Design |
| Seal Application | General Purpose |
| Lip Material | Nitrile |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Surface Speed [Nom] | 5,000 ft/min |
| Case Construction | Steel Case w/Inner Case w/4 Lugs |
| Shaft Dia. | 230 mm |
| Pressure | 10 psi |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Housing Bore Dia. | 280 mm |
| Construction | HDS2 |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 3.825 LB |
| EAN or UPC | 85311094146 |
