Find a Service Center
- Radial Shaft Seal
- 584.2 mm Shaft Diameter
- 644.525 mm Housing Bore Diameter
- 22.225 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Material | Fluoroelastomer - Viton |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/Inner Case |
| Construction | HDS1 |
| Housing Bore Dia. | 644.525 mm |
| Inch/Metric | Metric |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Non-Split |
| Seal Design | Assembled Design |
| Lip Style | Internal |
| Temperature Range [Max] | 400 °F |
| Shaft Dia. | 584.2 mm |
| Temperature Range [Min] | -40 °F |
| Pressure | 10 psi |
| Weight | 11.014 LB |
| EAN or UPC | 85311264501 |
