Find a Service Center
- Radial Shaft Seal
- 520.7 mm Shaft Diameter
- 558.8 mm Housing Bore Diameter
- 19.05 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Seal Design | Molded Design |
| Lip Material | Fluoroelastomer - Viton |
| Lip Style | Internal |
| Inch/Metric | Metric |
| Shaft Dia. | 520.7 mm |
| Case Construction | Steel Case w/Inner Case |
| Pressure | 15 psi |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 400 °F |
| Surface Speed [Nom] | 5,000 ft/min |
| Lip Type | Single Lip w/Spring |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 558.8 mm |
| Spring Material | Carbon Steel Garter |
| Construction | HDS2 |
| Seal Application | General Purpose |
| Weight | 9.906 LB |
| EAN or UPC | 85311134200 |
