Find a Service Center
- Radial Shaft Seal
- 454.03 mm Shaft Diameter
- 504.83 mm Housing Bore Diameter
- 20.65 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 250 °F |
| Lip Material | Nitrile |
| Seal Application | General Purpose |
| Lip Type | Single Lip w/Spring |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Construction | HDS2 |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Molded Design |
| Pressure | 15 psi |
| Housing Bore Dia. | 504.83 mm |
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 454.03 mm |
| Inch/Metric | Metric |
| Case Construction | Steel Case w/Inner Case |
| Weight | 9.083 LB |
| EAN or UPC | 85311130714 |
