
- Radial Shaft Seal
- 431.8 mm Shaft Diameter
- 482.6 mm Housing Bore Diameter
- 23.01 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Case Construction | Steel Case w/Inner Case |
Seal Application | General Purpose |
Pressure | 15 psi |
Lip Style | Internal |
Surface Speed [Nom] | 5,000 ft/min |
Temperature Range [Min] | -40 °F |
Temperature Range [Max] | 250 °F |
Cover/Compensation Ring/Plate Required | No |
Temp Description | w/6 Lugs |
Inch/Metric | Metric |
Spring Material | Carbon Steel Garter |
Shaft Dia. | 431.8 mm |
Seal Design | Molded Design |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Lip Type | Single Lip w/Spring |
Lip Material | Duralip (Carboxylated Nitrile) |
Construction | HDS2 |
Housing Bore Dia. | 482.6 mm |
Weight | 7.761 LB |
EAN or UPC | 85311129527 |
