Find a Service Center
- Radial Shaft Seal
- 390.53 mm Shaft Diameter
- 441.33 mm Housing Bore Diameter
- 20.65 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 441.33 mm |
| Case Construction | Steel Case w/Inner Case |
| Temp Description | w/4 Lugs |
| Shaft Dia. | 390.53 mm |
| Construction | HDS2 |
| Temperature Range [Max] | 250 °F |
| Seal Application | General Purpose |
| Inch/Metric | Metric |
| Lip Type | Single Lip w/Spring |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile |
| Temperature Range [Min] | -40 °F |
| Pressure | 15 psi |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Design | Molded Design |
| Weight | 5.893 LB |
| EAN or UPC | 85311126489 |
