Find a Service Center
- Radial Shaft Seal
- 381 mm Shaft Diameter
- 419.1 mm Housing Bore Diameter
- 17.48 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 400 °F |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Material | Fluoroelastomer - Viton |
| Inch/Metric | Metric |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Housing Bore Dia. | 419.1 mm |
| Seal Design | Molded Design |
| Spring Material | Carbon Steel Garter |
| Pressure | 15 psi |
| Shaft Dia. | 381 mm |
| Lip Type | Single Lip w/Spring |
| Seal Application | General Purpose |
| Construction | HDS2 |
| Case Construction | Steel Case w/Inner Case |
| Weight | 6.144 LB |
| EAN or UPC | 85311125505 |
