Find a Service Center
- Radial Shaft Seal
- 355.6 mm Shaft Diameter
- 425.45 mm Housing Bore Diameter
- 24.59 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Seal Application | Dirt Exclusion and Lubricant Retention |
| Lip Material | Duralip (Carboxylated Nitrile), Nitrile |
| Construction | HDSB2 |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Max] | 250 °F |
| Inch/Metric | Metric |
| Seal Design | Bonded Design |
| Shaft Dia. | 355.6 mm |
| Housing Bore Dia. | 425.45 mm |
| Lip Style | Internal |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 15 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Type | Dual Lip w/One Spring |
| Weight | 8.774 LB |
| EAN or UPC | 85311123785 |
