Find a Service Center
- Radial Shaft Seal
- 999.998 mm Shaft Diameter
- 1050.417 mm Housing Bore Diameter
- 23.012 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Style | Internal |
| Inch/Metric | Metric |
| Seal Application | General Purpose |
| Seal Design | Molded Design |
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Construction | HDS2 |
| Temp Description | w/6 Lugs |
| Housing Bore Dia. | 1050.417 mm |
| Surface Speed [Nom] | 5,000 ft/min |
| Shaft Dia. | 999.998 mm |
| Pressure | 15 psi |
| Temperature Range [Min] | -40 °F |
| Lip Type | Non-Split |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 13.874 LB |
| EAN or UPC | 85311170970 |
