
- Single Row Angular Contact Bearing, 85 mm ID x 180 mm OD x 41 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Material | Bearing Steel |
Flush Ground | Yes |
No. in Set | Duplex Set |
Limiting Speed - Grease | 3500 rpm |
Series | 7300P |
Origin | Single Row Angular Contact |
Enclosure | Open |
I.D. | 3.35 in, 85 mm |
Bore Type | Cylindrical |
Outer Ring Width | 1.61 in, 41 mm |
Locking Device | No Locking Device |
Seal Material | None |
Capacity | Standard Capacity |
Snap Ring | No Snap Ring |
Precision | Standard |
Radial Internal Clearance | Normal |
Bearing Type | Unmounted, Angular Contact |
Temperature Range [Max] | 450 °F |
Ball Material | Steel |
Width | 1.61 in, 41 mm |
Radial Internal Clearance Specification | Normal Clearance |
Fillet Radius | 2.5 mm |
Inch/Metric | Metric |
Cage Type | Metal |
Cage Material | Brass |
Rows of Balls | Single |
Dynamic Load Rating | 148 kN |
Static Load Rating [Max] | 32100 lbf |
Precision Level | Standard (ABEC 1) |
icNumber | 7699065 |
Static Load Rating | 122 kN |
O.D. | 7.09 in, 180 mm |
Contact Angle | 40 Degree |
Lubricant | Oil Preservative |
Internal Design | Universal Mounting |
Seal Type | Unsealed |
Limiting Speed - Oil | 4500 rpm |
Preload Level | Light |
O.D. Type | Cylindrical |
Inner Ring Width | 1.61 in, 41 mm |
Weight | 11.222 LB |
EAN or UPC | 97741018029 |
