
- Single Row Angular Contact Bearing, 65 mm ID x 140 mm OD x 33 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Inch/Metric | Metric Bore |
Static Load Rating | 80 kN |
Fillet Radius | 2 mm |
Material | Steel |
Snap Ring | No Snap Ring |
Capacity | Standard Capacity |
icNumber | 7695812 |
Outer Ring Width | 33 mm |
Preload Level | None |
Inner Ring Width | 33 mm |
Seal Type | Unsealed |
Seal Material | None |
Dynamic Load Rating | 24300 lbf |
Lubricant | Oil Preservative |
O.D. | 140 mm |
O.D. Type | Straight |
Flush Ground | Yes |
Precision Level | Standard (ABEC 1) |
Static Load Rating [Max] | 19400 lbf |
Radial Internal Clearance Specification | Normal Clearance |
Cage Material | Brass/Bronze |
Cage Type | Metal |
Radial Internal Clearance | Normal |
Limiting Speed - Oil | 6000 rpm |
Series | 7300PJ |
Origin | Single Row Angular Contact |
Locking Device | No Locking Device |
Width | 33.000 mm |
Temperature Range [Max] | 450 °F |
Limiting Speed - Grease | 4600 rpm |
Ball Material | Steel |
Bearing Type | Angular Contact |
Internal Design | Universal Mounting |
No. in Set | Single Bearing |
Contact Angle | 40° |
Rows of Balls | Single |
Bore Type | Round Bore |
Precision | Standard |
Enclosure | Open |
I.D. | 65 mm |
Weight | 4.828 LB |
EAN or UPC | 97741017794 |
