
- Single Row Angular Contact Bearing, 65 mm ID x 140 mm OD x 66 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
Inner Ring Width | 66 mm |
Radial Internal Clearance Specification | Normal Clearance |
Precision | Standard |
Temperature Range [Max] | 450 °F |
Origin | Single Row Angular Contact |
Lubricant | Oil Preservative |
No. in Set | Duplex Set |
Static Load Rating | 80 kN |
icNumber | 7697418 |
Limiting Speed - Oil | 6000 rpm |
Radial Internal Clearance | Normal |
Seal Material | None |
Material | Steel |
Rows of Balls | Single |
Bearing Type | Angular Contact |
Contact Angle | 40° |
Outer Ring Width | 66 mm |
Capacity | Standard Capacity |
Internal Design | Universal Mounting |
Preload Level | None |
O.D. Type | Straight |
Static Load Rating [Max] | 19400 lbf |
Series | 7300P |
Seal Type | Unsealed |
Width | 66.000 mm |
Locking Device | No Locking Device |
Enclosure | Open |
Cage Material | Brass/Bronze |
Bore Type | Round Bore |
Cage Type | Metal |
Inch/Metric | Metric Bore |
O.D. | 140 mm |
Ball Material | Steel |
Snap Ring | No Snap Ring |
Flush Ground | Yes |
Dynamic Load Rating | 24300 lbf |
I.D. | 65 mm |
Precision Level | Standard (ABEC 1) |
Limiting Speed - Grease | 4600 rpm |
Fillet Radius | 2 mm |
Weight | 5.628 LB |
EAN or UPC | 97741017770 |
