
- Single Row Angular Contact Bearing, 45 mm ID x 100 mm OD x 25 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Preload Level | None |
Contact Angle | 40° |
Origin | Single Row Angular Contact |
Fillet Radius | 1.5 mm |
Width | 25.000 mm |
Series | 7300PJ |
Precision Level | Standard (ABEC 1) |
Locking Device | No Locking Device |
Static Load Rating [Max] | 8430 lbf |
Capacity | Standard Capacity |
Static Load Rating | 41.5 kN |
Ball Material | Steel |
I.D. | 45 mm |
Inner Ring Width | 25 mm |
Dynamic Load Rating | 11800 lbf |
Enclosure | Open |
Bearing Type | Angular Contact |
Precision | Standard |
Temperature Range [Max] | 450 °F |
Radial Internal Clearance | Normal |
Cage Type | Metal |
No. in Set | Single Bearing |
Lubricant | Oil Preservative |
Seal Material | None |
icNumber | 7695811 |
O.D. | 100 mm |
Outer Ring Width | 25 mm |
Bore Type | Round Bore |
O.D. Type | Straight |
Seal Type | Unsealed |
Snap Ring | No Snap Ring |
Limiting Speed - Grease | 6400 rpm |
Radial Internal Clearance Specification | Normal Clearance |
Limiting Speed - Oil | 8300 rpm |
Material | Steel |
Rows of Balls | Single |
Flush Ground | Yes |
Cage Material | Brass/Bronze |
Inch/Metric | Metric Bore |
Internal Design | Universal Mounting |
Weight | 2.053 LB |
EAN or UPC | 97741017541 |
