Find a Service Center
- 90 mm ID x 225 mm OD x 3 7/8" Wide
- Open
- No Snap Ring
- Standard Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
- No filling notches
- Fully meets the requirements of American Petroleum Institute Specification 610
- Both the inner and outer rings have closure grooves
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
| Material | Steel |
| Cage Material | Steel |
| I.D. | 90 mm |
| Rows of Balls | Double |
| Limiting Speed - Grease | 1800 rpm |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 24° |
| icNumber | 7702647 |
| O.D. | 225 mm |
| Bearing Type | Angular Contact |
| Dynamic Load Rating | 63200 lbf |
| Width | 98.425 mm |
| No. in Set | Single Bearing |
| Preload Level | None |
| Limiting Speed - Oil | 2600 rpm |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Static Load Rating [Max] | 67400 lbf |
| Fillet Radius | 3 mm |
| Outer Ring Width | 3 7/8 in |
| Ball Material | Steel |
| Seal Material | None |
| Inch/Metric | Metric Bore |
| Inner Ring Width | 3 7/8 in |
| Radial Internal Clearance | Normal |
| Seal Type | Unsealed |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Weight | 40.0 LB |
| EAN or UPC | 97741016148 |
