Skip to content Skip to navigation menu
5300-M Medium Series Bearing

5313MFF

5300-M Medium Series Bearing
Item #100760739
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing
5300-M Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 65 mm ID x 140 mm OD x 2 5/16" Wide
  • Double Shielded
  • No Snap Ring
  • Maximum Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Has filling notches on one side to permit assembling the maximum number of balls into the bearing
  • Contact angles converge outside the bearing
  • All inner and outer rings have closure grooves
  • Bearings may be equipped with seals, shields, snap rings or any combination
  • Has very heavy radial capacity
  • Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Capacity Maximum Capacity
Origin Double Row Deep Groove
Radial Internal Clearance Specification Normal Clearance
Limiting Speed - Sealed 3200 rpm
Contact Angle 30°
Locking Device No Locking Device
Static Load Rating [Max] 36600 lbf
Outer Ring Width 2 5/16 in
Limiting Speed - Grease 3200 rpm
Snap Ring No Snap Ring
Cage Material Steel
Fillet Radius 2 mm
Material Steel
Precision Standard
Preload Level None
O.D. 140 mm
Lubricant Chevron SRI-2
Seal Material Metal
Temperature Range [Max] 250 °F
Inner Ring Width 2 5/16 in
Bore Type Round Bore
Radial Internal Clearance Normal
Inch/Metric Metric Bore
Static Load Rating 163 kN
Ball Material Steel
No. in Set Single Bearing
Enclosure Double Shielded
Temperature Range [Min] -22 °F
Width 58.738 mm
Seal Type Non-Contact Seals
Dynamic Load Rating 34700 lbf
Rows of Balls Double
Series 5300M
I.D. 65 mm
Limiting Speed - Oil 4300 rpm
O.D. Type Straight
icNumber 7700266
Cage Type Metal
Bearing Type Angular Contact
Precision Level Standard (ABEC 1)
Flush Ground No
Weight 8.693 LB
EAN or UPC 97741015615
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison